The 3298 can handle the tough chemical services.  As a sealless design, it’s an effective alternative to pumps with mechanical seal problems.  Meets strictest EPA regulations.

Model 3298 is a sealless, close-coupled or frame-mounted, centrifugal pump with an enclosed impeller that is driven by a synchronous magnetic coupling. All sizes of the 3298 meet the dimensional standards of ANSI B73.1 except for the 1X1.5-5 and the 1.5X2-6.

---

Specifications

Capacities to 1500 GPM (270 m³/h)

Heads to 530 feet (162 m)

Temperatures to 250° F (120° C)

Pressures to 225 PSIG (1551 kPa) 

---

Applications

Rail Car or Tank Unloading

Batch Chemical Process

Specialty Chemicals

Column Reflux or Bottoms

Reactor Feed

---

The CV 3196 i- FRAME is designed specifically to provide superior performance for process services containing solids. Gould’s concentric volute casing with recessed open impeller provides non clogging capability with minimal solids degradation, In addition , the CV 3196 i Frame can handle liquids entrained with air and gas. Since the induced flow or vortex impeller is recessed from the casing, velocities are low, and solids contact with the impeller is reduced, wear rate, solids degradation and shearing of liquid are minimized. The casing design is well suited to handling solids in liquid suspension. Anything that can exit the discharge will pass through the pump.

---

Specifications

Capacities to 2700 GPM (610 m3/h)

Heads to 440 feet (134 m)

Temperatures to 500° F (260° C)

Pressures to 285 PSIG (1965 kPa)

---

The Model 3171 is the Veteran vertical sump and process pump. Thousands of installations in industrial process, sump drainage, corrosive liquids, pollution control, molten salts attest to the 3171’s remarkable performance

---

Continue reading “Goulds ITT 3171 Vertical Sump and Process Pump”

The ITT Goulds 3196 i-FRAME is a horizontal overhung, open impeller, centrifugal pump. It is used in chemical, petrochemical, pulp & paper, primary metals, food & beverage and general industries This pump is ANSI B73.1 compliant and has interchangeability with a model that is based on 5 power ends and 31 hydraulic sizes. The 3196 Pump has an open impeller that is the acknowledged best design for chemical process services. It is ideally suited for corrosive/erosive liquids containing solids and stringy materials.

---

 

Specifications
Capacities to 7000 GPM (1590 m 3 /h)
Heads to 730 feet (223 m)
Temperatures to 700° F (371° C)
Pressures to 375 PSIG (26 bar)

---

 

Design Features
Fully Open Impeller
Engineered Seal Chambers
Patented Taperbore™ PLUS Seal Chamber
BigBore™ Seal Chambers

---

 

3196 Brochure

NOV MOYNO ® 2000 pumps set the standard in positive displacement pumping applications. The proprietary 2000 gear-type universal joint design effectively handles radial and thrust loads for maximum performance and long life.

These rugged pumps are able to handle abrasive materials in excess of 80% solids and offer a performance range to 4,500 GPM with pressure to 1,500 PSI.

Typical Applications : Sewage lift stations and headworks, Primary and tertiary sedimentation, Grit removal, Nitrification, Thickening and conditioning Dewatering, Multiphase fluid transfer, Lease automatic custody transfer, Adhesives, Slurries, Chemical metering, Polymer, Food and beverage processing, Starches, slurries, and coatings, Leaching / neutralization and Flocculants

Capacity – up to 4,500 gal/min

Pressure –up to 1,500 psi

Temperature – 14°F up to 230°F

---

NOV MOYNO® 2000 Pumps

2000WA – CLOSE COUPLED DESIGN

Typical Applications
Municipal Wastewater Treatment
Pulp and Paper
Oil and Gas
Food Waste
Petrochemical

---

2000WB – CLOSE COUPLED DESIGN

Typical Applications
Municipal Wastewater Treatment
Pulp and Paper
Oil and Gas
Food Waste
Petrochemical

---

G1 – FLANGED DESIGN

Typical Applications
Oil
Polymers
Municipal sludge to 10% solids
Titanium Dioxide
Paper coatings
Mining Slurries

---

G2 – SINGLE AUGER FEED

Typical Applications
Heavy clay slurries
Gypsum
Grout
Grape must
Municipal GBT sludge
Municipal sludge to 15% solids
Thick industrial sludges

---

G3 – BRIDGE BREAKER

Typical Applications
Pharmaceutical pastes
Heavy petroleum sludges
Plasticizers
Municipal sludge in excess of 30% solids
Paper stock in excess of 12% solids

---

G4 – 45 INLET DESIGN

Typical Applications
Pharmaceutical pastes
Heavy petroleum sludges
Plasticizers
Municipal sludge in excess of 30% solids
Paper stock in excess of 12% solids

---

2000 Pump Brochure

 

The Goulds ITT 3180 models are horizontal, end-suction, centrifugal pumps designed for heavy-duty process applications.  The 3180 pump comes with a standard impeller that is an open type designed to extend pump life. Thick vanes and full back shroud provide outstanding resistance to wear and breakage or an enclosed impeller Available for services where efficiency is a consideration and enclosed design is suitable for service conditions . The pump comes with large balance holes and back pump-out vanes to reduce axial thrust and stuffing box pressure for increased bearing and seal life. The entire 3180/3185 line (33 sizes) uses just four power ends.

---

Specifications
Capacities to 40000 GPM (9000 m3/h)
Heads to 410 feet (125 m)
Temperatures to 446° F (230° C)
Pressures to 16 bar (232 PSIG)

Applications
Digester recirculation
Make-up liquor
White liquor
Black liquor
High pressure / high temperature
pulp mill services
 Hot oil

3180 Brochure