Goulds ITT NM3171 Non- Metallic Vertical Process Pump

The NM 3171 casing and impeller are constructed of vinylester thermoset resin–industry’s choice for moderate corrosives. Maximum strength is achieved by fiber reinforcement. No fillers are used which reduce corrosion resistance. For severe corrosive applications. Casing and impeller interchangeable with Model NM 3196. Cost-effective alternative to high alloys.

Continue reading “Goulds ITT NM3171 Non- Metallic Vertical Process Pump”

Goulds ITT AF Axial Flow Pumps

Goulds line of axial flow pumps is unmatched in the industry for low head/high capacity pumping requirements, especially when corrosive or abrasive solutions or slurries are involved. Extended service life, mechanical reliability, custom designs and a wide range of materials allow the Model AF to stand out as the leader in the field.


Capacities to 200,000 GPM (35,000 m3/h)

Heads to 30 feet (9 m)

Temperatures to 600° F (300° C)

Pressures to 150 PSIG (1034 kPa)

Solids to 9 in. (228 mm)


Chemical – Evaporator and Crystallizer Circulation

Mining and Minerals – Phosphate, Soda Ash, Potash and Sodium Chloride Processing

Petroleum – Polypropylene Reactors, Xylene

Pulp & Paper – Black Liquor, Evaporator, Chlorine Dioxide Generators

Municipal – Sewage Digesters

General – Raw Water Pumping, Flood Control, Marine Ballast Transfer

Food – Beet, Cane, Corn, Sugar Evaporator

Goulds ITT High Pressure Ring Section Pumps

Goulds 3393 High Pressure Pump

Goulds 3355 High Pressure Pump

The Goulds Model 3393 is a radially split, segmented casing, multistage pump designed with modular interstage components. These identical components can be assembled to produce pumps of varying numbers of stages, hydraulics, materials, and configurations to meet the customer’s specific requirements. Its multiple suction nozzle and discharge nozzle orientations allow the 3393 to adapt to multiple piping installations and provide the piping designer with flexibility in plant layout. Multiple hydraulics for each pump size optimize efficiency across a vast range of applications. All intermediate stage components are identical which reduces spare parts inventory. These pumps are particularly well suited for reverse osmosis and boiler feed applications. Shower services, booster service and other high pressure services are applications where the Model 3393 may be applied.


Capacities to 3300 GPM (750 m3/hr)

Heads to 3300 feet (1000 m)

Temperatures to 400° F (204°C)

Pressures to 1650 psig (114 bar)

Goulds Model 3355 is a multistage ring section pump designed for high-pressure services including: boiler feed, reverse osmosis, shower service, pressure boosting, plus much more. Its modular design and multiple configurations make it ideal for your system.


Capacities to 1500 GPM (340 m3/h)

Heads to 1640 feet (500 m)

Temperatures to 280°F (140°C)

Pressures to 800 psig (55 bar)


Reverse osmosis

Boiler feed




Pressure boosting

High pressure cleaning

Snow making


Mine dewatering


Boiler Feed

Condensate Return


Reverse Osmosis

Shower / Spray Service

Mine De-watering

Cleaning Systems

Seal Water Booster

Product Transfer

Reactor Feed

Pressure Boosting

Goulds Trash Hog

Trash Hog

Goulds Trash Hog® is designed for superior solids handling capability, optimum pump performance and extreme ease of maintenance for a wide range of industrial, pulp and paper, mining and municipal wastewater services. Whether handling raw sewage, sludge, debris or plant wastes, there’s no other pump that compares to the Trash Hog®.

Continue reading “Goulds Trash Hog”

Gould’s ITT Pump Controls

Industrial Strength Pump Control


The PumpSmart PS200 integrates an industrial strength variable frequency drive with years of pump control logic and testing.

The PumpSmart is designed for any centrifugal type pump. From single pump applications to multi-pump (parallel configuration) applications, the PumpSmart can accurately control to pressure, flow or level. The workhorse of the PumpSmart family, the PS200 offers process control and pump protection in one easy-to-use package for virtually every industrial process. With pre-programmed applications such as pressure, flow, and level control, set-up is quick and easy. The PS200 is capable of coordinating efforts between other PS200 controllers as well as existing constant speed pumps.With the Patent Pending Torque Based Pump Protection (TPP) feature, the PS200 can recognize dry run, minimum flow, or runout conditions without the need for costly external sensors. With the Pump Wear Monitor (PWM)*, PumpSmart will periodically monitor your pump performance and automatically issue warnings when pump wear has reduced the performance of your pump.


The PumpSmart PS75 is a technologically advanced system that provides integral soft-starting, protection against pump failure due to process upsets, and the ability to Right-Size your pump in one easy to use package. Starting / Stopping Sensorless Vector motor control enables the PumpSmart PS75 to start your pump in a controlled fashion. This limits current in-rush, helping to improve your utility metrics, and it also reduces the stress on your pump and pumping system by building pressure and flow smoothly. This eliminates over pressure and water-hammer effects that are normally associated with across-the-line starting. When stopping, the PumpSmart PS75 similarly prevents water-hammer caused by check-valves slamming shut.Right-Sizing – Power consumption is a significant portion of your plants operating cost, and oversized pumps and control valves are a major factor in this. Right-Sizing allows you to electronically trim the performance of your pump, without sacrificing its ability to meet future demands. Remember: A 20% reduction in speed can result in a 50% reduction in power consumption.

Pro Smart Monitoring and Control

The ProSmart® predictive condition monitoring system enables you to IDENTIFY and SOLVE problems before they impact production. The ProSmart system collects and analyzed machine health every 5 seconds, automatically notifying you of changing conditions. Resources are optimized and maintenance activities are PLANNED instead of REACTIVE.A wireless architecture reduces installation costs and complexity. A web based client eliminates software installation and maintenance costs and also enables multi-site management. Approved for Class I, Division 2 hazardous areas.

Social Share Buttons and Icons powered by Ultimatelysocial